Эта страница ещё не переведена, поэтому вы читаете английскую версию.
Краткий ответ
If GTA 6 looks too dark in HDR, set the game's own HDR Calibration to Brightness 2,000, Black Levels 20 and Paper White 35 on a TV of about 1,000 nits or more. Push Square and Tech Times, citing HDTVTest, say the game ignores the PS5 and Xbox saved HDR calibration. Digital Foundry finds a 30 fps target. Reported, not tested by us.
Ключевые факты
- HDR fix
- Brightness 2,000, Black Levels 20, Paper White 35, per HDTVTest as reported by Push Square and Tech Times
- Meant for TVs of about 1,000 nits or brighter; tune to taste, per Push Square
- The game ignores console-level HDR calibration, per Push Square and Tech Times
- Frame-rate target
- 30 fps, per Digital Foundry
- Xbox 120Hz VRR output
- a small smoothness benefit in Digital Foundry’s test
- PS5 forced VRR
- no benefit at this frame rate in that analysis
Реклама

На этой странице
GTA 6 too dark in HDR? Open Options, Settings, Display, HDR Calibration in the game and try Brightness 2,000, Black Levels 20 and Paper White 35. Push Square and Tech Times, citing HDTV Test's Vincent Teoh, say the game ignores the HDR calibration saved on a PS5 or Xbox, so calibrating the console first does not set this game's picture. These are reported, not tested by us.
How do I fix GTA 6 looking too dark in HDR?
- Load the game and open Options, Settings, Display, then HDR Calibration (menu path per Push Square).
- Ignore the Rockstar logo step. Push Square says HDTVTest recommends skipping Rockstar's own brightness calibration, so it does not matter whether the logo is visible.
- Use the two boat-party sample images instead. Push Square says R1 toggles them between light and dark.
- Enter Brightness 2,000, Black Levels 20 and Paper White 35, the starting values Push Square and Tech Times report from HDTVTest for TVs of about 1,000 nits or more.
- Adjust by eye. Push Square says the best numbers depend on your screen and environment.
Tech Times reports Teoh's own method: lights off, Black Levels at 0, hide the UI, then raise Black Levels until a checkerboard pattern is just visible. It calls 2,000 / 20 / 35 a baseline that could change if Rockstar fixes the calibration. Neither outlet reports a Rockstar response or a patch as of November 20, 2026. Tech Times also says Rockstar's HDR support page tells players to turn on HGiG if the TV has it and turn off dynamic tone mapping; see our HGiG guide.
Реклама
Which settings should I change first?
Start with TV Game Mode, then the game's own HDR Calibration. KeenGamer recommended preparing console HDR first, but Push Square and Tech Times, citing HDTVTest, say the game ignores that saved calibration, so that step is optional for GTA 6. TV brightness, room lighting and panel behavior vary.
- Select the television’s Game Mode using its own menu. KeenGamer recommends this to reduce input delay.
- Check the console’s display output is set to HDR before launching the game.
- Open GTA 6’s HDR Calibration in Display and use the values in the section above.
- Check a dark interior and a bright outdoor scene. Revisit calibration if important detail is hard to see.
- If the minimap or money display is cut off, adjust Safe Zone, which KeenGamer also reports in Display.
The scene comparison in step 4 is our suggested check, not an independently tested calibration recipe. The settings guide covers additional HUD and camera options.
How do I calibrate HDR on PS5?
PlayStation Support gives these system steps. They set the PS5's own HDR output, which Push Square and Tech Times say GTA 6 ignores, so they still matter for other games:
- Open Settings, then Screen and Video.
- Open Video Output, then HDR.
- Select On When Supported if you want non-HDR games and apps to remain in SDR.
- Open Adjust HDR in Video Output and follow the brightness prompts.
- Return to GTA 6 and use its in-game HDR Calibration, not the console value, as described above.
PlayStation says Always On instead converts non-HDR software to HDR output. That option is a system preference, not proof that a game renders HDR internally. The in-game HDR Calibration is what changes GTA 6's picture.
What about Xbox HDR?
KeenGamer directs Xbox players to Settings, General, TV and display options, and recommends Calibrate HDR for Games before GTA 6’s calibration. Tech Times, citing HDTVTest, says the game ignores the Xbox's saved HDR settings too, so the in-game values above are the ones that count. That Xbox procedure is attributed to KeenGamer; our opened Xbox Support capture does not expose the full step-by-step body. We have not verified the menu on a console ourselves.
Реклама
Does VRR help GTA 6?
Digital Foundry reports a slight smoothness improvement when Xbox uses its operating system’s 120Hz VRR output container. This requires a compatible display and does not create a higher-frame-rate game mode.
For PS5, the same analysis says forced VRR does nothing at the game’s 30 fps target because the system range begins above 48 fps and lacks low-frame-rate compensation. The older PlayStation Blog describes general VRR behavior; Digital Foundry’s test supplies the game-specific distinction.
Can a 120Hz TV enable 60 or 120 fps?
Digital Foundry finds no 40 or 60 fps option on any console. A television’s refresh setting cannot add one. Its reported Xbox VRR benefit concerns the output container, while the game still targets 30 fps. The graphics guide separates frame rate, internal resolution and output resolution.
How do I reduce blur or excessive camera movement?
KeenGamer places Motion Blur Strength under Settings, Display, Visual Effects, and Camera Shake in the Camera tab. Digital Foundry records blur at 3 out of 10 by default. Change one option at a time and compare the result; a preferred blur value is personal rather than a confirmed best setting.
KeenGamer also recommends disabling TV motion interpolation, which brands name differently. Use your TV’s manual for its exact switch. Do not confuse interpolated TV frames with a higher rendering frame rate in GTA 6.
Реклама
Частые вопросы
Which TV settings should I change first?
Use the TV’s Game Mode, then open the game's own HDR Calibration under Options, Settings, Display. Push Square and Tech Times say the game ignores the console's saved HDR calibration, so setting that first does not change this game. We have not tested an optimal TV preset.
Does GTA 6 have HDR calibration?
Yes. KeenGamer and Push Square describe an HDR Calibration screen in the Display menu. Push Square, citing HDTVTest, says its Rockstar-logo step does not work as intended and suggests ignoring it. PlayStation Support separately documents the PS5 system HDR and Adjust HDR controls.
Will 120Hz output make GTA 6 run at 120 fps?
No. Digital Foundry reports a 30 fps target and no 40 or 60 fps mode. Its Xbox test uses a 120Hz VRR output container for a slight smoothness benefit; that does not change the game to 120 fps.
Does VRR help on PS5?
Digital Foundry says forced PS5 VRR does not help here: its system VRR range starts above 48 fps and lacks low-frame-rate compensation for this 30 fps title. The outlet reports a different, small benefit from Xbox’s 120Hz VRR output.
Where are the PS5 HDR controls?
PlayStation Support gives Settings, Screen and Video, Video Output, then HDR. On When Supported keeps non-HDR software in SDR; Always On converts that software to HDR output. Adjust HDR is in the same Video Output menu.
Should everyone use the same brightness value?
No. Push Square calls HDTVTest's 2,000 / 20 / 35 values starting points that depend on your screen and room, and Tech Times says they target TVs of about 1,000 nits or more. KeenGamer also describes Safe Zone for HUD clipping and Motion Blur Strength for in-game motion comfort.
Why is GTA 6 too dark on PS5 or Xbox?
HDTVTest's Vincent Teoh found the game does not use the console's saved HDR calibration, and that its own sliders behave unexpectedly, per Push Square and Tech Times. Follow the starting values above and tune by eye.
Источники
- PlayStation Support: How to change PS5 console resolution (video output settings)playstation.com
- PlayStation Support: How to enable HDR on a PS5 consoleplaystation.com
- PlayStation Blog: Variable Refresh Rate support for PS5 is rolling out this week (April 25, 2022)blog.playstation.com
- Xbox Support: Xbox recommended TV settings for HDRsupport.xbox.com
- Rockstar Newswire: Pre-Load Grand Theft Auto VI Now (November 10, 2026)rockstargames.com
- Digital Foundry: console frame rates and Xbox/PS5 VRR differencesdigitalfoundry.net
- KeenGamer: GTA 6 HDR Calibration and display settingskeengamer.com
- Push Square: GTA 6 too dark? Here's how to fix it on PS5 (November 20, 2026)pushsquare.com
- Tech Times: GTA 6 HDR settings, game ignores PS5 setup (November 20, 2026)techtimes.com
Связанные гайды

Лучшие настройки GTA 6 и частота кадров
GTA 6 нацелена на 30 fps без режима производительности, по данным Rockstar и Digital Foundry. Настройки PS5 Pro, DualSense и облачной игры, плюс настройка HDR, проверено 18.11.2026.

Графика GTA 6
Факты о графике GTA 6: Rockstar целится в 30 fps, называет PSSR и трассировку теней для PS5 Pro, но не публикует разрешение или режимы. Проверено 17.11.2026.

GTA 6 на PS5
GTA 6 на PS5: доступна с полуночи по местному времени 19 ноября 2026, $79.99 Standard или $99.99 Ultimate, до 212 ГБ, бонусы PS5 Pro и функции DualSense.
Реклама

Получайте новые гайды по GTA 6 на email
Новые гайды по мере публикации, плюс читы, когда они будут подтверждены. Отписка в любой момент.

